| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Anyone know where Shane is? http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=7643 |
Page 1 of 1 |
| Author: | Graham Steward [ Sat Jul 22, 2006 3:31 am ] |
| Post subject: | |
I need to find out what diameter truss rods he sells so Craig Holden can complete my Neck Tennon jig. |
|
| Author: | letseatpaste [ Sat Jul 22, 2006 3:33 am ] |
| Post subject: | |
I bought some cedar from him that he sent out on 7/11 and said he was going to be gone for two weeks. |
|
| Author: | Graham Steward [ Sat Jul 22, 2006 4:44 am ] |
| Post subject: | |
Thanks Jon. |
|
| Author: | Mark Tripp [ Sat Jul 22, 2006 7:24 am ] |
| Post subject: | |
Graham: He has the measurements here Scroll down about mid-page. Looks like 1/4 in wide. -Mark |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|